page_banner01

Battery Charger Oled Pcba Solution

Short Description:

For a battery charger solution with an OLED pcba screen, you would need to design a Printed Circuit Board Assembly (PCBA) that incorporates the necessary components for charging the battery and controlling the OLED screen.    Here is a general outline of the components and steps required:Battery Charging Circuit: Include a charging IC or module that can regulate the charging process, monitor the battery voltage/current, and prevent overcharging or over-discharging.


Product Detail

Product Tags

Battery Charger With Oled Electrical Specification

1.1 INPUT REQUIREMENT
RATED INPUT VOLTAGE ■100-240V~   ■120V~   ■230V~   ■Others:
INPUT VOLTAGE RANGE ■90-264V~     ■Others:
RATED   INPUT FREQUENCY ■50/60Hz       ■60Hz     ■50Hz     ■Others:
INPUT FREQUENCY RANGE ■47-63Hz       ■Others:
INPUT CURRENT 0.12A Max @Input 100-240V~
INPUT POWER 15W
PF >0.96
INRUSH CURRENT N/A
1.2 OUTPUT FEATURES
RATED OUTPUT SPEC.MIN SPEC MAX

Remark

Output Voltage

4.95VDC

5.05VDC

Output Current

2000mA

2200mA

Ripple and Noise

20mVp-p

40mVp-p

Turn-on delay time

<1S

<1S

Battery Charge@ <2.9V

Pulse

Pulse

Battery Charge@ 3.0V-4.0Vv CC  319MA

CC  320MA

Battery Charge@ 4.0V CV   4.2V CV   4.2V
Battery Capacity Display 1% 100% 0.96INCH OLED SILKSCREEN
1.3 PROTECTION FEATURE
PROTECTION FEATURE FUNCTION DESCRIPTION
Overcurrent If the load is in overcurrent mode ,the output must be protection (hiccupped & power reduced)
Short output If the load is in shorted mode, the output must withstand a continuous shorted status without damage.
1.4 SAFETY
ITEMS STANDARD  SPEC

Remark

Dielectric Strength (Hi-Pot) 3100VAC /5Ma/3S
Insulation Resistance 10 MΩ min Between input and output @500 VDC.
Leakage Current <0.25mA For Class II when the power supply is operated maximum input voltage and maximum frequency.
EMI Standards GB4343/GB17625
Electrostatic Discharge (ESD) ±8KV air discharge±4KV contact discharge IEC61000-4-2
Lightning Surge Power Line to Line: 1KV. IEC61000-4-5
Electrical Fast Transient / Burst (EFT) Power Line to Line: 1KV. IEC61000-4-4

RIPPLE VOLTAGE

Battery Charger With Oled Electrical-01 (7)
Battery Charger With Oled Electrical

RIPPLE VOLTAGE

Battery Charger With Oled Electrical-01 (1)
Battery Charger With Oled Electrical-01 (3)

EMC TEST

Battery Charger With Oled Electrical-01 (2)
Battery Charger With Oled Electrical-01

  • Previous:
  • Next:

  • Write your message here and send it to us