Photocells PT115BL9S Electronic Products Solution
SCOPE
This specification defines the configuration and performance requirements of the Photocell (PhotoControl) designed and produced by Kelta.
These requirements represent the features and functions that the end user can expect from the product.
Technical Specifications Catalog
● Input Voltage: 105-305VAC, Rated:120/208/240/277V, 50/60 Hz, Single Phase
● Connection: Locking type, three-wire plug for photocontrol as per ANSI C136.10-2010
● Color : Blue
● Light Level: Turn on = 10 -22 Lux, Turn off maximum = 65 Lux
● Operational Delay: Instant On, Off Max. 5 seconds
● Load Switching Capability: 5,000 operations at ANSI specified Load Test Levels
● D.C. Switched Relay: 15A,24V
● Operating Temperature: -40ºC / 70ºC
● Humidity: 99% RH at 50 ºC
● Rated Load: 1000 Watts Tungsten / 1800 VA Ballast
● Turn On to Turn Off Ratio: 1:1.5 standard
● Sensor Type :Photo Transistor
● Dielectric Voltage withstand (UL773): 1 minute at 2,500V, 60Hz
● Surge Protection: 920J
● Fail on
● Full ANSI C136.10-2010 Compliance
Configuration
SIZE (in inch & mm)
Bottom Marking (With Label) Picture As Reference
Package
Each Photocell will be packed into a unit box. Unit box size = 3.30” x 3.30” x 2.95”
100 Unit Boxes will be packed into a shipping carton. Shipping Carton size = 17.71” x 17.71” x 12.99” Weight = 10,500 grams including photocell product.
The label on the unit box will be marked with following information. The serial number can be easily scanned from the bar code label.